Sale!

AC30/6 – Tone Match Presets and Captures

Original price was: $19.99.Current price is: $0.00.

Presets and Captures based on our Vox AC30/6 Top Boost

Available for:

TONE MATCH PATCHES, CAPTURES, AND PROFILES OF OUR KORG ERA VOX AC30/6 TOP BOOST

For these presets, we have captured our Vox AC30/6 Top Boost (Korg era). The result is set of presets and captures that sound exactly like our amp, and the microphones, preamps, and EQ chains that we use to record it.

This is one of the sought-after ‘Korg Era’ AC30’s, made in England. Ours features an original Celestion Alnico Blue speaker as well as a vintage ’60’s Alnico Silver.

We’ve captured the amp with a Royer 121 and Earthworks SR25 through a stereo Neve 1073 preamp.

TONE MATCH (Gen 2) PATCHES (Applies to Line 6 and Fractal presets)

These are part of our ‘Tone Match’ line of patches. To create these patches, we make custom IR’s that ‘match’ the HX and Fractal amp models to our real-world amp. The result is the Line 6 and Fractal units sound almost exactly like our actual amplifiers.

The ‘Gen2’ indicates a new process we’ve used when Tone Matching our amplifiers that takes more of the amplifier’s cab and speaker into account, resulting in a more accurate tone match impulse response.

INDIVIDUAL UNIT DEAILS

Line 6 Patches available for Helix (floor, LT, and Native), HX Stomp (including Stomp XL), and POD Go.

Please make sure to import the appropriate patch for your hardware – they are not interchangeable. NOTE: The HX Stomp and POD Go folders include ‘FX” patches. These patches include the additional effects blocks from the full Helix patch.

SIGNAL FLOW AND EFFECTS

  1. Compressor
  2. Pitch (POG)
  3. Drives: KOT, 808, Fuzz, and more
  4. Volume
  5. Tremolo
  6. Chorus
  7. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
  8. Reverbs: Subtle and Huge
  9. Amps
  10. Cabs (User cabs)

The HX Stomp and POD Go presets cannot fit all the effects into a single patch. For those platforms, we include the amp and essential effects in the main patches, and then we include the additional effects blocks in the ‘FX’ patches. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

SNAPSHOTS

  • Snapshot 1: CLEAN. Basic clean tone with verb and quarter delay
  • Snapshot 2: DRIVE. Light Drive (Drive 1A)
  • Snapshot 3: DRIVE+. Med Drive (Drive A, Control Switch 1)
  • Snapshot 4: P&W LEAD. Big lead tone with delay and reverb
  • Snapshot 5: AMBI CLEAN. Clean tone with stereo delay (1/4 + 1/8d) and big reverb.
  • Snapshot 6: 80’s CLEAN. Clean tone with chorus
  • Snapshot 7: POG LEAD. Big lead tone like snap 4 but with POG
  • Snapshot 8: SWELLS. Big ambient tones

POD Go:

  • Snapshot 1: CLEAN. Base clean tone
  • Snapshot 2: DRIVE. Stage 1 drive tone
  • Snapshot 3: P&W LEAD. Lead tone with lots of delay and verb
  • Snapshot 4: AMBIENT. Ambient clean tone

NOTE: The HX Stomp patches do not include Snapshots

Fractal Presets available for Axe-FX III, FM3, and FM9

Please make sure to import the appropriate patch for your hardware – they are not interchangeable. NOTE: The FM3 folder includes an ‘FX” patch. This patch includes the additional effects blocks from the full Axe-FX and FM9 patches. Feel free to substitute any of these effects blocks into the main patch to suite your needs.

SIGNAL FLOW AND EFFECTS

  1. Compressor
  2. Pitch (POG)
  3. Drives: KOT, 808, Fuzz, and more
  4. Volume
  5. Tremolo
  6. Chorus
  7. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
  8. Reverbs: Subtle and Huge
  9. Amps
  10. Cabs (User cabs)

The FM3 presets cannot fit all the effects into a single patch. For those platforms, we include the amp and essential effects in the main patches, and then we include the additional effects blocks in the ‘FX’ patches. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

SCENES

  • Scene 1: CLEAN. Basic clean tone with verb and quarter delay
  • Scene 2: DRIVE. Light Drive (Drive 1A)
  • Scene 3: DRIVE+. Med Drive (Drive A, Control Switch 1)
  • Scene 4: P&W LEAD. Big lead tone with delay and reverb
  • Scene 5: AMBI CLEAN. Clean tone with stereo delay (1/4 + 1/8d) and big reverb.
  • Scene 6: 80’s CLEAN. Clean tone with chorus
  • Scene 7: POG LEAD. Big lead tone like snap 4 but with POG
  • Scene 8: SWELLS. Big ambient tones

TONEX AMP CAPTURES

For Tonex we have captured the amp through its entire gain range for all available channels (Brilliant and Normal). The Amp Model Presets and Profiles are numbered – higher numbers mean more gain. The ‘Edge of Breakup’ settings that we like to use with a pedal board are usually the 2 and/or 3 profile/capture.

QUAD CORTEX CAPTURES

For Quad Cortex, we have captured the amp through its entire gain range of the amp. The captures and are numbered – higher numbers mean more gain. The ‘Edge of Breakup’ settings that we like to use with a pedal board are usually the 2 and/or 3 capture.

ALL-IN-ONE PRESETS

Also included are gig-ready (Sunday morning ready, to be more precise) all in one presets utilizing captures of this amp and our drive pedals. We’ve included separate presets for both single coil quipped and humbucker equipped guitars. You can use these presets in both Scene and Stomp mode, and they cover a ton of sonic territory.

HOW DO YOU GET THE CAPTURES?

The captures and presets are available for free in the Cortex Cloud app. You’ll need to create an account and follow ‘WorshipTutorials’ to access the presets and captures (go here to create an account and access the app).

KEMPER PROFILES – Compatible with the Kemper Head, Stage, and Player products

For Kemper, we have profiled the amp through its entire gain range of the amp for all available channels (Brilliant and Normal). The Profiles and are numbered – higher numbers mean more gain. The ‘Edge of Breakup’ settings that we like to use with a pedal board are usually the 2 and/or 3 profiles.

HEADRUSH PRIME AMP CLONES AND RIGS

For Headrush Prime, we’ve included both rigs (patches) and amp clone(s). The Amp Clone is from the Brilliant channel of the amp (our favorite), and we’ve built both a ‘SC’ and ‘HB’ rig around the amp clone.

Headrush Prime Signal Flow:

  1. Input
  2. Compressor
  3. Pitch
  4. Overdrives
  5. Volume
  6. Amp Clone
  7. Tremolo
  8. Chorus
  9. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
  10. Reverbs: Subtle and Ambient
  11. Output

FOOTSWITCH CONFIGURATION

We’ve programmed the switches on the Headrush Prime to act like a traditional pedalboard. You’ll see individual effects mapped to the different buttons and labeled appropriately. If you’d like to make changes, the process is simple – the Headrush Prime manual provides great documentation if you’d like to create scenes or other button mapping.

Platform

Line 6 (Helix, HX Stomp, POD Go), Fractal (Axe-FX III, FM3, FM9), Kemper, TONEX, Headrush Prime

Reviews

There are no reviews yet.

Be the first to review “AC30/6 – Tone Match Presets and Captures”

Your email address will not be published. Required fields are marked *

Shopping Cart
AC30/6 – Tone Match Presets and Captures
Original price was: $19.99.Current price is: $0.00.Select options
Scroll to Top